Two Photon Absorption

From CleanEnergyWIKI
Jump to navigation Jump to search
Previous Topic Return to Third-order Processes, Materials & Characterization Menu Next Topic

Two photon absorption (TPA)is a third order non linear optical phenonmena in which a molecule absorbs two lower energy photons at the same time. The absorption is sensitive to a threshold value of intensity. This presents a number of possibilities for biomedical applications, and microscopy and microfabrication.

Two-Photon Excited Processes

Two Photo Absorption

Two photon absorption takes a molecule directly to the S2 state

Two photon absorption is related to the imaginary component of the χ(3) tensor. On a molecular level it is the imaginary component of γ. Two photons are simultaneously absorbed directly to S2 excited state without population of an intermediate eigenstate. Neither of the two photons have enough energy to get to S1 but with the sum of the two they can reach the second singlet state. The dotted line indicates a virtual state that last a certain length of time (10-15 sec) which means a very short time to get the second photon in. The closer the energy is to the normal S1 state the closer the duration of time is to that of a normal excited state (10-9 sec). As the energy different between S1 and the photon gets smaller, the longer the duration, and the greater the chance of a second photon absorption.

The two photon cross section δ has a term in the denominator referred to as the detuning term that relates to the energy difference. The smaller the difference the higher the two photon cross section.

Rate expression and selection rules for TPA

Once S2 is attained it will quickly relax down to the first excited state and then there can be fluorescence, an additional photon absorption, electron transfer to another molecule, energy transfer to another molecule or photo chemistry. All the same processes can occur that would happen with one photon absorption to the S1. The two photon cross section is very small and it can only be had with the use of intense lasers.

σ is the one photon cross section which relates to the transition dipole moment. Delta is the two photon cross section.

The rate of formation of the excited state (analagous to two reactants colliding A + B = C) can be thought of as a rate expression that is dependent on concentration of the reactants, and a first order or second order rate constant.

<math>\frac {dN_{OP}} {dt} = \sigma N_{GS} F\,\!</math> is the rate for one photon absorption
<math>\frac {dN_{TP}} {dt} = \frac {1}{ 2} \delta N_{GS} F^2\,\!</math> is the rate for two photon absorption


Where

<math>\sigma\,\!</math> is the intrinsic probability of a collision resulting in absorption, the absorption cross section
<math>N_GS\,\!</math> is the number of molecules in the ground state
<math>F\,\!</math> is the flux or intensity

If a reaction requires two A and one B to all collide simultaneously to create C then the rate expression has a third order rate constant.

In two photon absorption the selection rules are the inverse of the rules for those for single photon absorption because there are two transitions, so gerade to ungrerade is forbidden and gerade to gerade, and ungerade to ungerade are allowed. Single photon absorption is the equivalent of IR spectroscopy Raman spectroscopy is a two photon process and therefore it is a third order non linear optical phenomena.

<swf width="500" height="400">http://depts.washington.edu/cmditr/media/08 TPA.swf</swf>

Advantages of TPA


Two-Photon Processes Provide 3-D Resolution

A sample molecule in a cuvette is bombarded with light tuned for two photon absorption above, and a different wavelength fro one photon absorption below.

As you shine a focused beam (bottom) into sample at a wavelength suitable for one photon absorption you get fluoresence along the entire path. A beam tuned for two photon absorption (top) focuses to a very small point. Each single photon has too little energy to be absorbed right up to the point that the intensity is sufficient to trigger TPA. The focal point of the beam varies linearly with the distance from the lens. The area (and therefore intensity) of the beam varies as the square of the radius of beam at that point (pir2), and the two photon absorption varies as the square of the intensity. So TPA varies as the forth power of the distance. Thus TPA builds up and drops off very quickly on either side of the focal point giving it a single point appearance. Thus it can be directed accurately in in three dimensions.

TPA Processes Provide Improved Penetration of Light Into Absorbing Materials

A light beam from the right is quickly absorbed in single photon wavelength below. The upper two photon tuned-beam is able to penetrate without absorption until the the focus gets the intensity to a sufficient level.

In a concentrated solution of cumarin one photon absorption (below right) starts immediately at the interface and decays off with the (penetration depth). Because single photons are unable to excite the two photon tuned sample until they are at a critical intensity the two photon laser beam can penetrate farther into a sample. The ability to penetrate a material and to be focused accurately in three dimensions make the TPA ideal for medical applications in which a drug can be activated by TPA at a very precise location.

Calculating and Designing for TPA

Measuring the two photon cross section

A beam splitter allows comparison of each pulse through a signal cell and a reference cell

To measure the TPA cross section a tunable laser is focused on a beam splitter which then goes to a reference cell with a photomultiplier tube (PMT) and to a signal cell (with unknown sample) and a PMT. A cross section is created by measuring the fluorescence of the unknown sample across a range of wavelengths produced by a tunable laser. In practice single pulses of intense laser light can vary greatly in intensity, and since TPA is exponentially related to the light intensity these random fluctuations can be exaggerated. By comparing the fluorescence of the sample with each pulse to the reference cell with a known TPA cross section, and then integrating the results you can determine the sample cross section accurately. Otherwise you would have to be able to measure the intensity of each pulse individually which is rather more complicated.

Measurement considerations:

  • fs-ns pulse duration; cw
<math>

n^{(2)}_{ph} = 1/2 \delta(\omega) N F^2(\omega)\,\!</math>

<math>n_{fl} = \eta n^{(2)}_{ph}\,\!</math>
  • only for fluorescent materials
  • 90º or backward collection of fluorescence
<math>signal \propto I^2\,\!</math>
  • deviations: linear absorption, stimulated emission, saturation, ...
  • importance of spatial and temporal profile

See equipment video on Two-Photon Spectroscopy

Perturbative Expression for γ, as Relevent to Two-Photon Absorption

The perturbative expression for gamma can be applied for two photon absorption with some changes.


<math>\gamma( -\omega; \omega, -\omega, \omega) \propto \frac{ M^2_{ge} \Delta \mu^2_{ge}} {(E_{ge} - h \omega - i \Gamma_{ge})^2(E_ge-2h\omega -i \Gamma_{ge})} + \frac {M^2_{ge} M^2_{ee^{\prime}}} {(E_{ge} = h\omega- i \Gamma_{ge}) (E_{ge^{\prime}} - 2h\omega - i\Gamma_{ge})}\,\!</math>

The denominator is the difference between the state energy (Ege) and the photon energy (ℏ ω).

There are two components, and the imaginary component accounts for the absorption. The :<math>\Gamma_{ge}\,\!</math> is the damping factor. In order to achieve TPA the sum of the energies of the two photons must equal the energy of the excited state.

For a centrosymmetric molecule :<math>M^2_{ge} \Delta \mu^2_{ge}\,\!</math> (the transition dipole) goes to zero so that entire term goes to zero. For non centrosymmetric molecules both terms are required.

The TPA cross section (δ ) can be related to gamma and several other terms.

<math>\delta(\omega) = \frac {8\pi^2h\omega^2} {n^2c^2} L^4 Im \gamma( -\omega; \omega, -\omega, \omega)\,\!</math>

Donor-Acceptor TPA Calculations

TPA calculations for stilbene

This is a calculation for a simple donor/acceptor stilbene with an amino group and a formyl group. The delta for the first excited state (S0 to S1) starts out small reaches a peak and then near the cyanine limit it goes down to zero. This is because the delta mu term follows this same pattern.

The change to the second state (S0 to S2) has multiple peaks because the system is two photon resonant and one of the photons is resonant with the S1 state. This is referred to as double resonance and occurs when the transition to S1 is very close to half of the transition to S2. The scale of the cross section for the transition into S1 is on the order 1000 while the transition for S2 is on the order of 10-20000.

See Kogej 1998 [1]

Two-photon absorption example

Two photon and linear absorption spectra compared

Here is a centrosymmetric molecule with donor groups on both ends. It has a long conjugation path. There can be excitation into S1, TPA into S2, rapid relaxation by internal conversion back to S1 and then fluorescence coming out of S2. There is no fluorescence from S2 because in most cases the rate of relaxation from S2 to S1 is much faster than the fluorescence lifetime. In fact in centrosymmetric molecules the transition from S2 to S1 is symmetry forbidden for one photon. Therefore the transition dipole moment is close to zero and the coupling between the grounds and the excited state is close to zero resulting in a long radiative lifetime of the excited state. If there is strong transition dipole going up then there will be a short radiative lifetime in the excited state which in turn leads to a high quantum yield for fluorescence. This is because the rate term for this step dominates the other terms in the expression for quantum yield.

However even if the molecule was not centrosymmetric and both one and two photon transitions are possible the internal conversion relaxation is so fast that there still would not be fluorescence from S2. This leads to the rule coined by Michael Kasha that says that no matter what state you excite into fluorescence will only occur from the lowest lying excited state. There are molecules that are exceptions to Kashsa rule such as azuylene but these are very few. The fluorescence from both one and two photon absorption will be from S1.

In the graph note that the energy of the TPA is lower (longer wavelength- red line) than the single photon absorption (blue line) and of the fluorescence (green line). The TPA peak is around 720, dividing this by two the equivalent single photon energy for this would be 360nm. The peak for linear absorption to S1 is 430nm. This shows that each photon in TPA is absorbing to a state that is higher than the S1 state and that there is very little single photon absorption in this zone (the small absorption seen at 360nm is vibrational rather than electronic).

In non linear optics studies it is important to do the measurements at a variety of wavelengths so that you can get a spectrum. You can’t compare molecules by looking at a single wavelength or using the wrong pulse length.

see Rumi 2000 [2]

Laser dyes

Tpa laserdyes.png

Xu and Webb measured the cross section for laser dyes a goupert mayer. One dye had cross section of 300 goupert meyer (two-photon absorptivity, δ, is expressed in Goppert-Mayer units (GM), with 1 GM=1×10-50 cm4 s molecules−1 photon−1.). The process of two photon absorption was predicted by a German physicist Maria Goeppert Mayer in 1929. TPA was not actually observed until the early 60s when lasers were developed that had sufficient intensity to cause it. Most molecules have GM < 1. These dye have very high two photon cross sections..

See Xu and Webb [3] Albota 1998 [4]Fisher 1998 [5]

Vagaries of measurement: The “famous” AF-50

Various reported measurements of δ for AF-50

The chart shows various measurements for the molecule AF-50. This is indicative of the problems of measurement in the NLO field. The measurements were made using various techniques and conditions. The experiment with a delta of 11560 was conducted with a timescale of nanoseconds. This is duration is long enough for there to be a convolution of TPA and single photon absorptions that can appear to give a high TPA cross section. This high value could very well be useful for example in making coatings for safety glasses that could exclude high intensity laser light. But it is not useful for the scientific measurement of the molecules.


Optical Limiting via Two-Photon Absorption in bis-Donor Stilbene

Two photon fluoresence vs non linear transmission

This molecule behaves as an optical limiter. The curve of two photon fluoresence (TPF shown in red) and non linear transmission (NLT shown in blue) are similar except their scales are different. The NLT scale has units of 10-46 and TPF is on the scale of 200, there is a factor of 100 difference. TPF is measure of the cross section, NLT is an effective cross section that involves two photon absorption followed by excited state absorption.

Initial Observations on Bis-Donor Stilbene

bis-Donor Stilbene

Bis Donor Stilbene (BDAS) is an instructive molecule to study.

Evidence for two-photon absorption

  • The molecule is very electron rich
  • Strong nonlinear transmission
  • Strong blue fluorescence when pumped with orange light
  • Fluorescence depends on I2
  • Two-photon cross section, δ = 210 x 10-50 cm4 s/photon, for stilbene δ = 12 x 10-50 cm4 s/photon

The cross section is about 20 times that for the molecule without the electron donor groups. This is very high value and it is useful to learn why the donors have this effect.

Interesting features for two-photon applications

  • High fluorescence quantum yield, φfl ~ 0.9
  • High optical transmission
  • Low oxidation potential, ED+/D = + 0.035 V vs. Fc/Fc+

It is very easy to oxidize in the ground state and is a powerful reducing agent in the excited state.

Proposed Model to Enhance TPA Cross Sections in Symmetrical Molecules

Tpn bisdonorstilbene symm.png

Theoretical calculations can help to explain this molecule’s properties.

BDAS has large and symmetrical charge transfer from nitrogens (becoming more positive) to central vinyl group in the middle (becoming more negative) that is associated with large transition dipole moment between S1 and S2. (μ ee’2 )

These results suggest that a large change in quadrupole moment between S0 and S1 is leads to enhanced delta. If you want to make dipole (or quadrapole) moment larger you can increase the distance over which charge is separated and you can increase the charge that is separated by that distance, or do both.


Bis Donor Substitution

Tpn bisdonorstilbene subst.png

This suggests certain design strategies for increasing the dipole or quandrupole moment. The transition dipole moment between the ground and first excited state is 7.2 for stilbene and 8.9 for BDAS. Between S1 and S2 the dipole goes from 3.1 D stilbene to 7.4 D for BDAS. This term is squared and this is the reason there such a high TPA cross section for BDAS.

<math>\delta_{S_0 \rightarrow S_2} \propto \frac {M^2_{ge} M^2_{ee^{\prime}}} {(E_1 - E_0 - \hbar \omega ) \eta} \,\!</math>

Transition Dipole Moments and BOA

Tpa transdip densities.png

If the components that contribute to transition dipole moments are located farther from the middle of the molecule there will be higher transition dipoles. In DBAS large coefficients on nitrogens coupled with extended distance from the molecular origin result in large excited state coupling.


Transition energy in eV for various conditions of charge transfer.

There is an optimal amount of charge transfer that is required to get the largest cross section.

Design of TPA chromophores

Chromophore variations and δ in 10-50 cm4 s/photon

To get large quadrupole moment and large quadrupole moment changes you can do the following;

  • Increase the distance between the donors so that you increase the distance over which you transfer the charge.
  • Increase the strength of the donors so as to increase the amount of charge that is transferred.
  • Add acceptors to the middle of molecule so that that section attracts charge.
  • Flip the relation with donors in the center and acceptors on the end.

The diagram shows the effect on delta of different donors (shown in blue) and acceptors (shown in red) configurations and longer molecular chain lengths. The combination of these techniques achieves cross-sections in the thousands.

Chain-Length Dependence

Two Photon Fluorescence by wavelength for various length molecules

The graph shows that as the molecule gets longer the energy of the two photon absorption cross section decreases so the wavelength of the peak increases and the magnitude of the TPA increases due to the increasing transition dipole moments

Transition Dipole Moments

Tpa trans dipole.png

Here is an expression for delta that explores the change in transition dipole moment between the ground state and the excited state and the photon energy. The oscillator strength of the curve is calculated by integrating the absorption spectra plotted in energy and measuring the area under the curve. From this you can extract the transition dipole moment.


<math>\delta _{max} = f(\omega, n) \frac {M^2_{ge} M^2 _{ee^{\prime}}} {(E_{ge} - \hbar\omega)^2 \Tau_{ge^\prime}}\,\!</math>

where:

<math>\delta_{max}\,\!</math> is the cross sections that was measured.
<math>M_{\alpha\beta}\,\!</math> is the transition dipole moment for two levels α,β
<math>E_{\alpha\beta}\,\!</math> is the energy for absorption to for two levels α,β
<math>\hbar \omega\,\!</math> is the photon energy that was used to get the TPA.
<math>\Tau_ge^{\prime}\,\!</math> is the damping term which is estimated


In summary

<math>\delta_{ge} \propto M^2_{ge} M^2_{ee^\prime} , \Delta E^{-2}\,\!</math>

Effect of D/A Substitution

Trends for dipole moments of quadrupolar molecules

By making these molecules quadrupolar we increase the transition dipole moment between the first and second excited state (ee and ee’) The data supports this strategy.

Applications for TPA

Two-photon initiated polymerization and 3D microfabrication

TPA can be used to stimulate cross linking in a polymer.

Two photon absorption can be used to initiate polymerization on a precise microscopic scale. A beam can be focused at 3D coordinates in a polymer causing cross linking. Then non-crosslinked portions are washed away. This can be used for microfabrication. The model of the bull is about 5 microns wide and has some very fine features.


See Wu 1992 [6]

and Maruo 1997 [7]

"Micro bull"

"Thinking man"

Two-photon initiators with enhanced sensitivity

New dyes increase the effective range of power where 3D "writing" can occur, thus increasing the possible resolution

Regular photo-initiators are not excellent two photon absorbers. However a femptosecond layer can apply very large power. The goal is strike a power balance between the minimum writing range and the maximum destructive level. For conventional initiators there is only a factor of 2.5 in the power writing range. Newly developed two photon dyes expand this to range to a factor of 50. This lets you write more accurately and faster because the beam does not have remain in the same place as long.

Fluorescent and Refractive Bit Optical Data Storage

Fluorescent and Refractive Bit �Optical Data Storage

This technique can be used to convert non fluorescent polymer into a fluorescent form that has a higher density due to cross linking. If the density goes up and the polarizability stays the same the susceptibility goes up and the refractive index goes up. Peter Renzepus at the UC Urvine is using this method to create 3D optical memory. The ability to write on a 100 different planes increases the amount of information that can be stored (gigabits or terabits of data per cm3)

Photochemistry Generated via an Intramolecular Electron Transfer

Tpa photochemistry.png

Another method to initiate this process with electron transfer. A two photon dye connected to a photoactive group will absorb the two photons to cause photoinduced electron transfer (PET) producing a radical anion and radical cation. This group can cleave to give rise to photoproducts. There is a history of doing this kind of chemistry not necessarily with dyes connected to each other and not with two photon absorption.

Why 3D Micro and Nanofabrication

Examples of applications for nanofabrication

There is a technology pull towards miniaturization of devices and patterned materials.

  • Need to free-form fabricate 3 dimensional structures
  • Increasing need for ability to pattern a variety of materials
  • Need to couple nano-scale object with micro-scale objects
  • Areas impacted by 3D micro- and nano-fabrication include MEMs, microfluidics, photonics and tissue engineering. The photo on the left is a chain link fence is twice the thickness of a human hair. In tissue engineering cells grow better on certain topologies (ie scaffolds).

Media: Negative Tone Resist

Exposed areas remain after development in the positive tone resist process

This is an example of a two photon dye that creates a radical initiator. After absorption the radicals initiate polymerization. The polymer is less soluble and the nonpolymerized material thus this is a known as a negative photo resist.

Sub-diffraction limited resolution

TPA microfabrication of subdiffraction scale features. The lines are shown are 170nm.

Current lithography techniques are able to make structures at 60 nm. However TPA microfabrication can do this resolution with 3D resolution was well.

Media: Positive Tone Resist

In positive tone resist the exposed areas are removed during development

A positive tone resist becomes more soluble in portions that are exposed to light. This allows you to etch away material by exposing it with light.

Tetrahydropyran can be protonated on the oxygen creating a carbo cation thus converting the esther to a carboxylic acid. Esthers are not soluble in basic water but acids are so by dipping the material in an alkaline solution you can dissolve away the exposed material. A proton is needed.

A photo acid generator (PAG) will absorb light and then transfer an electron to the carbon sulfur sigma bond orbital, cause the bond to break homolytically yielding a methyl radical which will attack benzene and create a proton. The proton then starts the esther to acid reaction.

Micro-electromechanical Systems (MEMS) Applications

Micro electro mechanical systems are used for sensors, actuators, micromachines and optical switches. Inkjet heads and disc drive heads are MEMS. These can be fabricated with negative and positive tone materials.


MEMS image gallery

This example is drawn with a positive tone resist. The two pools are connected by a series of very fine tubes.

Microscopic Imaging

If you attach a two photon dye to a particular organelle and then scan the cell in 3D with a precise laser beam to build a detailed microscopic 3D model of the structure with submicron resolution. All of this technology begins with the design of molecules that are able absorb light effectively which goes back to third order nonlinear optics, polarizability and hyperpolarizability.

Summary

Perturbation theory predicts which molecules will have large two photon cross sections. Molecules with symmetrical quadrupolar charge transfer lead to large TPA cross sections because they have strong coupling between different excited states. Measurements need to be done very carefully using very short pulses and done over many wavelengths. There are many applications for TPA including microfabrication, optical limiting, and 3D microscopic imaging.

  1. T. Kogej et.al. Chem. Phys. Lett. 1998, 298, 1.
  2. Rumi et al., JACS 122, 9500, 2000
  3. C. Xu, JOSA B, 1996;
  4. M. Albota, Appl. Opt., 1998;
  5. W. G. Fisher, Appl. Spectr., 1998.
  6. E. S. Wu, J. H. Strickler, W. R. Harrell & W. W. Webb, SPIE Proc. 1674, 776 (1992)
  7. S. Maruo, O. Nakamura & S. Kawata, Opt. Lett. 22, 132 (1997)